MB-300-TB-1 Suspended Solids / Sludge Concentration Transmitter
TURB-1300 Suspended Solids / Sludge Concentration Transmitter
Application area ：
1，Chemical process；2，Recovery and detergents ；3，Drinking & s urface water measurement ；4， Water & waste water treatment。
Instructions Color
| Features： |
l 144X144 microprocessor turbidity/suspended solid/MLSS transmitter l Waterproof & dustproof proof design, to fit wall/panel/pipe installation l Automatic sensor clean function with programable time interval and hysteresis l Large LCD display, it can show the operation status and symbols l With backlight sensor, automatic and manual backlight setting function l Single-point calibration can be adjusted according to the laboratory or on-site analysis l With password and multi-key design,security protection enhancement l Equipped RS-485 MODBUS RTU protocol, it can connect to the digital system directly (MB-300-TB-1 serial only) l Two programmable output (MB-300-TB-1 serialonly) |
| Parameters： | ||
| Suspended solids | ppm,mg/l | |
| MLSS | g/l | |
| Range | Depending on the electrode | |
| Resolution | AUTO(0.01,0.1,1) | |
| Hi/Lo Relay Output | 2 sets Hi/Lo programmable,N/OFF, 240VAC/ 0.5A Max | |
| Analog Output | 1 or 2 sets of programmable & isolate current DC 0/4-20mAwith programable according to SS/MLSS | |
| Wash Relay Output | ON: 0...9999sec. / OFF: 0...999.9hours | |
| Specifications： | ||
| AC supply | 100V~240VAC±10%,50/60Hz | |
| DC supply | 20~40VDC | |
| Temp | 0~50℃ | |
| Dimensions | 144mm×144mm×115mm(H×W×D) | |
| Protection | Correspond to IP65(NEMA 4) | |
| Installation | wall/panel/pipe mounting | |
| Cut off Dimensions | 138mm×138mm (H×W) | |
| Weight | 0.8Kg | |